2008-2011 Yamaha Rhino 700 Copperhead® ECU

New product

The Copperhead® ECU is a plug and play replacement (not a piggyback solution) for the stock ECU in the Yamaha Rhino 700. It controls the timing and fuel, and our high energy and repetitive fire ignition allows for crisper throttle response, reduced fuel consumption, while giving substantial power gains.  

More details

Need to give more information about your machine?

Add any extra information, then select the "Save" button BEFORE adding the product to your cart.

  • loader


USD$411.50

Add to wishlist

More info

The Copperhead® ECU provides a typical 6% power increase from idle to red-line (WOT), and a part throttle power increase of up to 25% over stock. In addition, the top speed limiter has been increased. The ECU also allows for the fuel to be adjusted for aftermarket camshafts and pipes (requires optional programmer interface). Comes complete with the Copperhead® ECU and a machine specific adapter harness containing the EFI specific electronics and mating connectors for that model. 


Features:

  • Repetitive fire ignition delivers hotter spark with longer spark duration for maximum power and virtually eliminates misfires, while giving you easy starts and crisp throttle response. Preloaded performance map allows the machine to run cooler, produce more horsepower and more torque, while minimizing fuel consumption.
  • Shipped with machine specific harness that plugs directly into factory wiring harness. Toggle switch on the unit allows user to switch between two preloaded setups.
  • Default preloaded map keeps factory limiters (reverse / speed) and similar power when the toggle switch is in position #1. When the toggle switch is in position #2, all limiters are disabled, and the timing is optimized for maximum power on 87 octane fuel. Setups and maps can be changed and optimized for different fuel grades via our programming interfaces (sold separately).

Learn why a replacement ECU is superior to an piggy back fuel controller:     

ECU VS FUEL CONTROLLER WHITE PAPER

If you require a configuration not listed, enter your requirements in the "Product Customization" section, below.  Select "Save" to store you configuration, and then add it to the cart.

Manual

COPPERHEAD ECU INSTALLATION INSTRUCTIONS

Specifications

COPPERHEAD ECU SPECIFICATION SHEET 

Data sheet

Compatible Machine ManufacturerYamaha
Compatible Machine Year2009
Compatible Machine Year2011
Compatible Machine Year2008
Compatible Machine Year2010
Compatible Engine Size700
Compatible Fuel DeliveryFuel Injected
Dimensions (LxWxH)145mm x 115mm x 42mm (without wiring harness)
Weight755 g
Warranty1-Year
Programming ConnectorDB9 male (proprietary connection)
Input Voltage9-15V (Minimum 11V required to start engine)
Input Current0.9A RMS @ 25C
Output Voltage+/- 170V
Output Energy14.5 mJ
Firing Duration15 degrees via multi-spark
Operating Temperature-55C to +100C

Reviews

No customer reviews for the moment.

Write a review

2008-2011 Yamaha Rhino 700 Copperhead® ECU

2008-2011 Yamaha Rhino 700 Copperhead® ECU

The Copperhead® ECU is a plug and play replacement (not a piggyback solution) for the stock ECU in the Yamaha Rhino 700. It controls the timing and fuel, and our high energy and repetitive fire ignition allows for crisper throttle response, reduced fuel consumption, while giving substantial power gains.  

Accessories

Customers who bought this product also bought: