Below is a description for the maps in this directory:



For each model, there are three different combinations:

1) SAFETY-87 octane.  This map is very similar to what was loaded when your ECU left our facility. 

	Map #1 is loaded with all limiters enabled, making it safer for inexperienced riders.

	Map #2 is optimized for 87 octane, with all limiters disabled.



2) SAFETY-91 octane.

	Map #1 is loaded with all limiters enabled, making it safer for inexperienced riders.

	Map #2 is optimized for 91 octane, with all limiters disabled.



3) 87-91 octane.

	Map #1 is optimized for 87 octane, with all limiters disabled.

	Map #2 is optimized for 91 octane, with all limiters disabled.





- Starting maps for pipes.  Labeled based on the extra amount of fuel applied (+5%,+10%, +15%, +20%).

- More free flowing the pipe, the higher the extra fuel.

- I.E. Muzzy: 5% (slip on), 10% (full exhaust), HMF 15-20%









Click on the desired map(s), and save to a location on your computer.  Open the USB Application,

and go to the "FILE" menu, and select "OPEN".  Browse for the desired file.  Then do a "MAP",

"WRITE TO POD" to save the file to the interface.





Changes:

20130801 Rev2.3

- Revision changed to match firmware.



20121205 Rev2.0

- Revision changed to match firmware.



20110011 Rev1.6

- Changed Afterstart Cycle Hold to prevent engine from starting until the entered number of rotations occur.

	Used for machines that tend to be hard (rich) starting.  NOTE:  Map number just changed from 1.5 to 1.6 to match firmware.



20100609 Rev1.5

- Lowered the cold afterstart enrichment to improve cold start performance.

- Leaned out the no throttle row in the lean tables to prevent a stall when coasting on the engine brake.



20100330 Rev1.5

- Changed the afterstart cycles to match 1.5 firmware.

- Increased prime pulse to aid in starting.