************************************************************************************

************************************************************************************

************************************************************************************



NOTE:

The latest files can be found at http://www.velocitydevices.com.  Select your

machine from the Products menu.



What you need to do the download:

1)  Copperhead application Rev. 1.1 or greater. (the Copperhead application 

	that will run on your PC).

2)  One firmware file for your machine (i.e. "2008_Teryx_750_Rev6.11.vdi").  The 

	firmware has a .VDI extension.

3)  CDI map file (i.e. "Kawi OEM-91 octane.pod").  The map has a .POD 

	extension.  The maps are labeled based on machine, and settings in the two 

	toggle switch positions.  I.E. the map above is for the Kawasaki machines, 

	has OEM (stock) type settings (i.e. limiters) in toggle switch #1 setting, 

	and full performance for 91 octane fuel with no limiters in toggle switch #2 

	position.



*NOTE:  Right click on the files, and select "Save Target As".  This will eliminate 

	any issues with Windows trying to open the files.  If you have problems, 

	place your mouse pointer over the file, hold the left button, and drag

	the file to the desktop.  You should now be able to see the file through 

	the Copperhead application.

*NOTE:  You can ONLY open the map and firmware files with the Copperhead 

	application.  Double-clicking on the map or firmware files will result in 

	a Windows error.

	





************************************************************************************

************************************************************************************

************************************************************************************



APPLICATION INSTALLATION:



1)  Double click on the Copperhead application to do the installation.  Follow 

	through the installation. If you get a warning that the "Publisher of this 

	software could not be verified", click "allow" to allow the installation to 

	continue.  



Once the application is installed, it can be run by clicking on the "Start Button" 

in the bottom left corner of the screen, go to "All Programs", and click on the 

"Copperhead" to run the application.



NOTE:  When you run the Copperhead program, you'll get a blank white screen.  If

	you see a "spreadsheet" screen with a lot of zeros, then you've installed

	the CopperheadEFI program for the EFI machines.





************************************************************************************



FIRMWARE UPGRADE:



2)  Connect the USB cable to the USB interface and to the computer.  Your PC should 

	automatically install the necessary drivers.

3)  Connect the memory interface to the CDI (you'll need the CDI to be in the 

	machine	and connected to the PC through the interface cable for this 

	download).

4)  Turn on the key, run the Copperhead application 1.1, and click on "flash", 

	and "write flash".  Browse for the desired firmware file 

	(i.e. "2008_Teryx_750_Rev6.11.vdi"). There are about 65 pages to be written.

5)  Once the PC indicates it is complete, turn off the key, and unplug the 

	interface.



************************************************************************************



MAP UPGRADE:



6)  Run the Copperhead application on the computer.  Connect the USB interface 

	to the PC only.

7)  Do a file, open, and browse for the desired map file.  

	(i.e. "Kawi OEM-91 octane.pod")  Then click on "map", "write to pod" to save

	it in the USB interface.

8)  Unplug the USB interface from the PC, and plug it into the CDI, and turn on 

	the key.  In 0-30 seconds the status LED on the CDI will come on solid red.

	If very little is different between the new and old maps, the light will

	come on very quickly.  



	Turn off the key, and unplug the interface.



************************************************************************************

The quad is now ready to be ridden.  To change settings in the CDI, you only need 

to run steps 6-8, above.

************************************************************************************